Salt

Marine Aquarium Salt for Fish only aquariums and Reef Aquariums.

7 Item(s)

per page

Grid  List 

Set Descending Direction
  1. Brightwell Aquatics NeoMarine Salt

    Brightwell Aquatics NeoMarine Salt

    $72.11

    Brightwell Aquatics NeoMarine Salt 150 Gallon Mix Learn More
  2. Brightwell Aquatics NeoMarine Kalibrate 150 Gallon PreMix Bucket

    Brightwell Aquatics NeoMarine Kalibrate 150 Gallon PreMix Bucket

    $49.98

    Technical Background

    The single most important contributor to success with a marine aquarium is maintaining water parameters within tolerable ranges; no amount of lighting and filtration can compensate for water that is lacking in numerous essential elements and that does not meet the criteria required for survival by marine organisms. A successful marine aquarium therefore begins with quality seawater.
    Mixed as directed, Brightwell Aquatics NēoMarine Kalibrate Salt Pre-Mix creates an ideal marine environment for aquarium inhabitants by providing major elements, all non-conservative (depleted by natural chemical and biological processes) minor and trace elements, and elements known to be utilized in the production of biological pigments (biochromes) in precise natural seawater ratios. Conservative minor and trace elements are not depleted in marine environments, indicating that they are not utilized by marine life or do not take part in chemical reactions in seawater; as such, they are not necessary for the survival of aquarium inhabitants, and are not part of the NēoMarine Kalibrate formulation. NēoMarine Kalibrate is manufactured in Brightwell Aquatics’ production facility in Pennsylvania, ensuring that we maintain absolute control over quality; it is not outsourced as many competing US-manufactured salts are.  Additionally, elements are provided by individual salts (no seawater evaporite is used); this enables us to maintain a consistent formulation and appearance to the finished salt mix at all times. Ingredients are measured using an extremely accurate process, and each batch of NēoMarine Kalibrate is blended in a dry, clean environment. Our production process promotes uniformity of particle size and homogeneity throughout each container. Small batches are created and lot numbered to maintain the highest standards of quality control. NēoMarine Kalibrate utilizes ingredients of superior grades, and contains no detectable ammonia, nitrate, phosphate, or organic substances when prepared to standard specific gravity with high-purity sodium chloride. It is based on the NēoMarine formulation, which has been extensively tested over a multi-year period with 100% success on all manner of marine invertebrates, fishes, and desirable algae. NēoMarine Kalibrate is formulated for all marine organisms, not just fish or reef inhabitants.

    Instructions and Guidelines

    Do not mix in an aquarium containing live organisms. Do not use without mixing with sodium chloride as instructed. Do not handle with wet hands. May have a slight sulfurous odor when the container is first opened; this is a result of the use of anhydrous magnesium chloride and will dissipate.

    Each ~43 g of NēoMarine Kalibrate mixed with ~91 g of non-iodized sodium chloride (NaCl) will increase the resultant specific gravity of 1 US-gallon to ~1.025 g/cm3. It is presumed that aquarists employing this method will have access to an accurate scale with which to measure the required mass of Kalibrate and NaCl. Altering the ratio of Kalibrate:NaCl will resultantly alter the concentrations of elements provided by Kalibrate in the prepared seawater, while maintaining the relative ratios of the elements; for example, increasing the mass of Kalibrate used from 43 g to 46 g per gallon prepared will change the final magnesium, calcium, potassium, and strontium concentrations from 1,288-, 413-, 398.8-, and 7.625-ppm, respectively, to ~1,378-, ~442-, ~427-, and ~8-ppm, however it should be remembered that doing so will also decrease the total volume of water that this container will treat. It is strongly recommended that water purified via reverse osmosis and/or deionization be used for seawater preparation. Allow the freshly-made seawater to mix thoroughly with a submersible pump. Always use an accurate hydrometer or (preferably) refractometer to determine the specific gravity of prepared seawater. Ensure that the water temperature matches that of the established aquarium (use a submersible heater if necessary). Allow water to mix, preferably while being aerated, until pH and alkalinity become completely stable, indicating that gas equilibrium has been achieved. It is strongly recommended that at least 24 hours of mixing be allowed to pass before adding the water to an established aquarium. This extra time enables gas formed during the salt dissolution to escape, further stabilizing pH; elevated alkalinity at the suggested ratio of Kalibrate:NaCl is often a result of insufficient mixing time. Note that water temperature and mixing rate will influence the speed with which the salt goes into solution.
    The best sources of sodium chloride are “plain” or non-iodized (Kalibrate already contains the proper amount of iodide so additional iodide which would be contributed by iodized salt is not necessary), greater than 99% purity, and do not contain anti-caking agents such as Yellow Prussiate of Soda (a.k.a. “YPS”), stabilizers such as Sodium Cyanurate, buffers, or metal detoxifiers; so-called “standard pool salts” with no additives may meet these requirements and can often be purchased in 40-lb. bags for pennies per pound. Keep in mind that FCC- or Food-grade salts will have a lower percentage of insoluble materials and elements such as calcium and magnesium per unit mass than will pool salts; USP- and ACS-grade salts are even better. For specific recommendations of sodium chloride, contact us directly.
    When changing salt blends, it is recommended that no more than 5% of the total system volume is changed on a weekly basis for the first 3-months; this enables system inhabitants to gradually adjust to the changing water chemistry with minimal irritation. It is recommended that 10 - 20% of the total water volume in an aquarium system be replaced every 7 - 10 days; this helps maintain proper water chemistry and consequently benefits aquarium inhabitants.


    Caution: Keep out of reach of children. Not for human consumption. Contact with dry product may cause skin and/or eye irritation. In case of eye contact, flush eyes with cool water and seek immediate medical attention.

    Learn More
  3. ESV-B-Ionic Salt Mix

    ESV B-Ionic Seawater System Salt Mix w/ Measuring Supplies

    Starting at: $33.99

    E.S.V. B-Ionic Seawater System Salt Mix

    A unique solution to many of the problems associated with all dry synthetic seawater blends.

    Learn More
  4. Red Sea Coral Pro Salt

    Red Sea Coral Pro Salt

    Starting at: $22.95

    Red Sea Coral Pro Salt Learn More
  5. Red Sea Reef Salt 50 Gallon Bag

    Red Sea Reef Salt 50 Gallon Bag

    $19.25

    Red Sea Reef Salt 50 Gallon Bag Learn More
  6. Tropic Marin PRO Reef Salt

    Tropic Marin PRO Reef Salt

    Starting at: $18.99

    Tropic Marin PRO Reef Salt Learn More
  7. Tropic Marin BIO-ACTIF Sea Salt

    Tropic Marin BIO-ACTIF Sea Salt

    Starting at: $23.50

    Tropic Marin BIO-ACTIF Sea Salt Learn More

7 Item(s)

per page

Grid  List 

Set Descending Direction