Uniseal Compression Slip Bulkhead

Uniseals are used to attach pipe to just about any container in situation where bulkheads will not work. The most common use is on curved surfaces such as storage drums, buckets, and even other pipe. Made from a flexable material that will conform to must flat or curved surfaces.  Great for plumbing aquarium equipment, water containers and much more.  No gluing required to create a water tight seal.

Uniseals feel like rubber, but they are actually made of Alcryn MPR rated to 40 psi and warranted for 25 years. They are immune to cold, will not harden and hold pressure and vacuum. The sizes correspond to standard Schedule 40 PVC pipe. Fit tank wall thicknesses up to 3/8".

1/4'' Uniseal Specs:

• Pipe ID - 1/4'' (6mm)
• Pipe OD - .54" (13mm)
• Holesaw size: 1/2'' (13mm)
• Up to 3/8" Wall Thickness. (9mm)

3/8'' Uniseal Specs:

• Pipe ID - 3/8'' (9mm)
• Pipe OD - .675" (17mm)
• Holesaw size: 1'' (25mm)
• Up to 3/8" Wall Thickness. (9mm)
• Made in the USA

1/2'' Uniseal Specs:

•  Pipe ID - 1/2'' (13mm)
• Pipe OD - .84" (21mm)
• Holesaw size: 1 1/4'' (32mm)
• Up to 3/8" Wall Thickness. (9mm)

3/4'' Uniseal Specs:

• Pipe ID - 3/4'' (19mm)
• Pipe OD - 1.050'' (27mm)
• Holesaw size: 1 1/4'' (32mm)
• Up to 3/8" Wall Thickness. (9mm)

1'' Uniseal Specs:

• Pipe ID - 1'' (25mm)
• Pipe OD - 1.315'' (33mm)
• Holesaw size: 1.75'' (44mm)
• Up to 3/8" Wall Thickness. (9mm)

1 1/4" Uniseal Specs:

• Pipe ID - 1.25" (32mm)
• Holesaw size: 2" (51mm)
• Up to 3/8" Wall Thickness. (9mm)

1 1/2" Uniseal Specs:

• Pipe ID - 1.5" (38mm)
• Pipe OD - 1.90" (48mm
• Holesaw size: 2.5" (63mm)
• Up to 3/8" Wall Thickness. (9mm)

2" Uniseal Specs:

• Pipe ID - 2" (50mm)
• Pipe OD - 2.375 (60mm)
• Holesaw size: 3" (76mm)
• Up to 3/8" Wall Thickness.

3" Uniseal Specs:

• Pipe ID - 3" (76mm)
• Pipe OD - 3.500" (89mm)
• Holesaw size: 4" (101.6)
• Up to 3/8" Wall Thickness.