SKIMZ ZAR-127 AUTOMATIC ZEOLITH REACTOR
Zeolite reactors are intended to be used with Zeolith stones to support selective bacterial strains helping reduce nutrient levels in the aquarium. In many cases, this will create an Ultra-Low Nutrient System (ULNS) where you may need to actually dose nutrients and elements back into your aquarium since Zeolith based stones can be very effective. The most notable system, Korallen-Zucht's Zeovit system has proven to produce stunning coral reef tanks but has been feared by many reefers due to the daily maintenance of pumping the Zeo stones in the reactor. Skimz has completely removed the need for daily manual maintenance with the ZAR reactors. Automating the flushing of the stones ensures it gets done on time, every time, but even more important, it gives you more time to enjoy your aquarium.
We highly recommend following a system or program that has a method of testing and supplements since maintaining a ULNS system will require many additives and supplements to be added back to the tank at regular intervals.
Two-Stage Wash Program
Depending on your preference, you can set the Skimz ZAR-157 to flush the Zeostones twice a day or as often as once per hour. The DC pump will automatically increase the flow to rinse the stones which completely removes the need to manually shake or pump your Zeo reactor.
- Mode 1 - Rinses twice per day
- Mode 2 - Pump flushes once every hour
Four Pre-Set Volume Settings
Dial in the perfect flow for your amount of zeolite media with the Skimz QP4.0 DC pump and controller.
- 0.3 Liters
- 0.6 Liters
- 0.9 Liters
- 1.2 Liters
- Dimensions - 6.25" L x 6.75" W x 18.25" H
- Pump - Skimz QP4.0
- Power Consumption - 30 watts @ 120VAC
- Max Zeolite Size - Up to 3.5 cm
Max. Capacity - 1.2 Liters (0.3 Gallon)
Max Aquarium Size - up to 125 Gallons
Recommended Sump Water Level - 7" to 9"
- 1x ZAR-127 Reactor Body
- 3x Thumb Screws
- 1x Quick Dosing Access Port
- 1x Skimz QP4.0 DC Pump
- 1x ZAR-127 Controller
- 1x Power Supply