The Reef Octopus Bubble Blaster skimmer pumps are the very essence of true innovation in the marine aquarium hobby. Popularly found on the Super Reef Octopus skimmer (aka SRO). Until recently most other skimmer pumps on the market are modified water pumps fitted with a modified impeller to draw and chop air.
The Bubble Blaster were the first pumps specifically engeneered to be a skimmer pump for unmatched air shredding performance and efficiency. The pump is enhanced with a digital control circuit board inside that controls directional start-up direction and RPM speeds. This smart circuit board provides the reliability and high performance the Bubble Blaster skimmer pumps are known for.
A unique feature of the Bubble Blaster is its clear volute housing which allows you to see inside the pump without having to take it apart. You can easily see if something is stuck inside. The greatest feature of the Bubble Blaster pumps is the enormous amount of air that they pull in relation to water volume which is the key to aggressive protein skimming. With the performance of these pumps and a 2-year warranty how can you go wrong?
BUBBLE BLASTER HY-1000S PROTEIN SKIMMER PUMP
Replacement pump for the following Reef Octopus skimmer models:
SRO1000, XP1000sss, LX1000 and XP1000, LS1000
This pump can be retrofitted to fit Classic OTP Skimmers (Only the OTP-GT pump models)
Classic 110(int/ext), NWB110, DNWB110
- Bubble Blaster HY-1000s Skimmer Pump
- Max Water Flow: 150gph*
- Max Air Draw: 540 L/H (19SCFH)*
- Dimensions: 170 x 135 x 100mm
- Outlet Size: 3/4″
- Efficiency: 75%
BUBBLE BLASTER HY-2000S PROTEIN SKIMMER PUMP
Replacement pump for the following Reef Octopus skimmer models:
SRO2000int/ext/sss, XP2000int/ext/sss, LX2000*
This pump can be retrofitted to fit Classic OTP Skimmers (Only the OTP-GT pump models)
NWB150, DNWB150, Diablo-Extreme XS160 (pump has to sit on the side not under), Classic 150int
*You must have the original output adapter from your skimmer's pump in order to mount the new pump to the skimmer.
- Voltage: 120v/60Hz
- Wattage: 30w
- Air draw: 960 L/H (34 SCFH)*
- GPH: 250*
- Footprint: 205 x 155 x 125mm
- Outlet Size: 1″
- Efficiency: 90%
BUBBLE BLASTER HY-3000S PROTEIN SKIMMER PUMP
Replacement pump for the following Reef Octopus skimmer models:
SRO3000int/ext/sss, XP3000int/ext/sss, Huricone Cat 1
This pump can be retrofitted to fit Classic OTP Skimmers* (Only the OTP-GT pump models)
NWB200, Diablo/Extreme XS200, Classic 200int
*There is an addition part needed to convert the pump to the skimmer body for some models that must be requested at the time of purchase due to the added cost of the part.
- Voltage: 120v/60Hz
- Wattage: 40w
- Air draw: 1100 L/H (39 SCFH)*
- GPH: 425*
- Footprint: 205 x 155 x 125mm
- Outlet Size: 1″
- Efficiency: 90%
BUBBLE BLASTER HY-5000S PROTEIN SKIMMER PUMP
Replacement pump for the following Reef Octopus skimmer models*:
SRO5000int/ext/sss, XP5000int/ext/sss
This pump can be retrofitted to the following Reef Octopus skimmers
Diablo/Extreme XS-250, XS-300, XS-350 ($10 extra part), Hurricone Cat2 Int ($10 extra part), Hurricone Cat2 Ext (No longer available), NWB 250
*You must have the original output adapter from your skimmer in order to mount the pump to the skimmer.
- Voltage: 120v/60Hz
- Wattage: 55w
- Air draw: 2100 L/H (72 SCFH)*
- GPH: 480*
- Footprint: 220 x 170 x 150mm
- Outlet Size: 1.25″
- Efficiency: 95%
BUBBLE BLASTER HY-10000S PROTEIN SKIMMER PUMP
Replacement pump for the following Reef Octopus skimmer models:
SRO 7000, 8000 & 9000 Commercial Skimmers, XP8000int/ext
*There is an addition part needed to convert the pump to the skimmer body for some models that must be requested at the time of purchase due to the added cost of the part.
- Voltage: 120v/60Hz
- Wattage: 125w
- Air draw: 4000 L/H (140 SCFH)*
- GPH: 870*
- Footprint: 245 x 190 x 165mm
- Outlet Size: 1.25″
- Efficiency: 95%