Sea Swirl

-
Sea Swirl 1/2" Wave Maker
$139.00These items ship directly from Sea Swirl. At this time, there is a 10 - 14 day delay in shipping from time of order.
OUR 1/2" MODEL WILL FLOW APPROXIMATELY 500/550 GPH MAXIMUM. THE TOTAL HEIGHT WITH FITTING ATTACHED ON TOP IS 4".
Standard brackets fit frames of glass tanks with 1-3/8" width max. Units are now supplied with a BLACK fpt x fpt inlet(for hard pvc plumbing) and optional fitting included for hose connections.
Learn More
Inlets are ADJUSTABLE for an easier installation of incoming water supply.
Free using 13900 Specialty Reward Points!
Earn 139 Specialty Reward Points -
Sea Swirl 3/4" Wave Maker
$179.00These items ship directly from Sea Swirl. At this time, there is a 10 - 14 day delay in shipping from time of order.
OUR 3/4" MODEL WILL FLOW APPROXIMATELY 800/850 GPH MAX. THE TOTAL HEIGHT WITH FITTING ATTACHED ON TOP IS 4 1/2".Standard bracket assembly supplied fit's glass tanks with tank frame width of 1-5/8" max. Units are supplied with a BLACK fpt x fpt inlet(for hard pvc plumbing) with the optional barb fitting included for hose connections.
Learn More
Inlets are now ADJUSTABLE for easier installation of incoming water supply.Free using 17900 Specialty Reward Points!
Earn 179 Specialty Reward Points -
Sea Swirl 1" Wave Maker
$199.00These items ship directly from Sea Swirl. At this time, there is a 10 - 14 day delay in shipping from time of order.
OUR 1" MODEL WILL FLOW APPROXIMATELY 2000 GPH. THE TOTAL HEIGHT WITH FITTING ATTACHED ON TOP IS 4 3/4".Standard bracket assembly supplied fit's glass tanks with tank frame width of 1-5/8" max. Units are now supplied with a BLACK fpt x fpt inlet(for hard pvc plumbing) with optional fitting included for hose connections.
Learn More
Inlets are ADJUSTABLE for easier installation of incoming water supply.Free using 19900 Specialty Reward Points!
Earn 199 Specialty Reward Points -
Sea Swirl 1.5" Wave Maker
$390.00These items ship directly from Sea Swirl. At this time, there is a 10 - 14 day delay in shipping from time of order.
The 1.5'’ Sea Swirl Model satisfies the need for an oscillating device for large aquariums to create a broad oscillating current, not linear current like our competitors at an economical price and it is very energy efficient too!
Learn More
Using our customer’s request’s and needs for a higher flow product for over 4 years now, we have developed and tested the 1.5'’ SS Model with great success.
The 1.5'’ Model was designed for tanks 180 gals. and up and offers the truly smallest footprint area seen in the aquarium of only 2-1/4'’
The 1.5'’ Sea Swirl is to be used with the Low Wattage/ High Flow pumps such as ReeFlo Snapper, Dart, Barracuda and Hammerhead along with many of the Dolphin line of aquarium pumps that people use to return water to their tank. When using the 1.5'’ model it is to be hard-plumbed only!
Also, with the optional 2'’ outlet the 1.5'’ Sea Swirl will produce exceptionally wide gentle circulation.
Two units mounted in opposite corners(front/rear) in the aquarium would cover every area of the tank with ‘’swaying’‘ motion which is seen in nature. This motion is not fast like some of the products on the market, but will produce a strong ‘’wave-crashing’‘ motion then a very calm current will follow as the Sea Swirl oscillates.
As corals grow into high current areas in the aquarium if the current is Linear the corals will tend to shed tissue and possibly even perish, grow around the linear/pulsed current or stop growing all together to avoid the straight line current. Check out the Penn State video with Dr. Sanjay Joshi on our home page! Not so with oscillating current as it is always changing from strong to calm, just like the natural current pattern in the ocean.
With our 12 years in the industry producing our smaller Sea Swirl models here in United States plus the added superior repair and customer service over this time you are assured of a quality product. To back up this statement we are giving a 2 year warranty(supplied info card must be sent in to Aquarium Currents).....One of the BEST in the Industry compared to our competitors!Free using 39000 Specialty Reward Points!
Earn 390 Specialty Reward Points -
Sea Sweep Propeller Pump Oscillator
Starting at: $249.95
The ‘’Uniqueness’‘ of this particular product over the DIY Versions is the Power Head cord is Un-seen when installed in the center of the hollow Threaded adjustable length black 6'’ extension pipe and routed through the Black Coupler and the Body of the ‘’Sea Sweep’‘ and out the Top. Extra Protection for the power cord is provided by a supplied piece of convoluted nylon sheath.
We will have Two ‘’SEA SWEEP’‘ Models available to fit anyone’s budget.An ‘’Economy‘’ Model( 5.5'’L x 3.25'’ W x 2'’H) which will oscillate ONLY the NON-CONTROLLABLE Tunze Nano Streams (6015,6025,6045) and Tunze Stream 2(6065,6085) and the non-controllable older Square Tunze Streams (6060,6080,6000,6100,6200) and the Koralia Evolution Power heads.
**IF YOU REQUIRE ABSOLUTE QUIETNESS FROM YOUR EQUIPMENT THE ECONOMY MODEL MAY HAVE SOME MOTOR NOISE WHILE OPERATING.**The ‘’Deluxe’‘ Model (5.5'’L x 3.25'’W x 2.5'’H...½'’ higher than Economy) will oscillate ALL of the above mentioned Non-Controllable Models and the CONTROLLABLE FULL SIZE ROUND TUNZE STREAM 2 Models (6105,6155,6205,6305).....ALL the Controllable NANO STREAMS (6055,6095) AND the older CONTROLLABLE Square TUNZE STREAMS (6101,6201,6301) and the Koralia Evolution Powerheads too!
Each Model is Economical to operate... Only 3 watts.... and TOTALLY MAINTENANCE FREE! 6'’ of Threaded pipe to adjust the length of positioning of power head in the water column. YOUR CHOICE of Mounting Bracket supplied.... Either a mounting Bracket for standard Plastic Framed Glass tanks such as Perfecto, AGA, Marineland..... OR Custom Tanks with Perimeter Euro Bracing, Acrylic Top Tanks and the ‘’Rim-Less’‘ Tanks such as Elos etc. Custom Brackets also available if FRAMES ARE WIDER THAN 1.5'’.
Please check out the schematic section for bracket adjustment ranges depending on your mounting needs and dimensions of the different models. ALL Models come with a 1 year warranty and Sea Swirl's Well Known Customer Service and Superior Repair Department if needed.
Sea Sweep Deluxe Standard Plastic Framed Glass Tank Bracket
Sea Sweep Deluxe Oscillates ALL Tunze Propeller Pumps Controllable and Non-Controllable. Deluxe Motor(same as our 1.5'' Sea Swirl Model) Very Quiet! Dimensions of enclosure 5.50L x 3.25W x 2.50T. Bracket supplied to mount on Standard Plastic Framed Glass Tanks with MAX Opening of 1-5/8''. CUSTOM Brackets available to accept Larger Frames!
Sea Sweep Deluxe "Rimless" Tank Mounting Bracket
Sea Sweep Deluxe Oscillates ALL Tunze Propeller Pumps Controllable and Non-Controllable. Deluxe Motor(same as our 1.5'' Sea Swirl Model) very Quiet! Enclosure Dimensions 5.50L X 3.25w X 2.50''T. Bracket supplied to mount on ''Rimless'' Tanks.
Sea Sweep Deluxe Minus Bracket to Mount Older Square Tunze
Same as all the deluxe models but without the necessary bracket for older square Tunze's. This model will oscillate only nano and round stream pumps. Please remember to let us know the item number of the model you want so we know which bracket to install to mount the unit on the tank.
Sea Sweep Economy Standard Plastic Framed Glass Tank Mounting Bracket
Sea Sweep Economy Oscillates only non Controllable Tunze propeller pumps. Economy motor (Same as our 3/4" Model, may have associated motor noise, seems to resonate a little more in the smaller enclosure. Enclosure Dimensions 5.5"Lx3.25"Wx2" T. Bracket supplied to mount on standard plastic framed glass tanks with MAX opening of 1 5/8".
Sea Sweep Economy Perimeter Braced/Acrylic Tank Mounting Bracket
Sea Sweep Economy Oscillates ONLY non controllable Tunze propeller pumps. Economy motor (Same as our 3/4" Model, may have associated motor noise, seems to resonate a little more in the smaller enclosure. This model's dimensions are 5.50"L x 3.250" W x 2" T. Braket supplied to mount on Perimeter Braced or Acrylic Tank cut out area.
Learn More







