,

Genesis Reef Systems RENEW™ Advanced

Be the first to review this product

Sign up for price alert

$469.95
Factory Direct
Use Your Points:
You will earn 469 Specialty Reward Points for buying this product
OR

Genesis Reef Systems RENEW™ Advanced

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Genesis Reef Systems RENEW™ Advanced

Details

Product Description

The RENEW™ Advanced system gives you additional peace of mind by starting with the Basic system, but adds two Level Sensors and four of our versatile Level Sensor Shrouds. The Level Sensors monitor the water levels in your aquarium sump and replacement bins to prevent costly run-dry equipment damage or messy overflows. The nearly endless mounting configurations provided by the Level Sensor Shrouds make sure that you can put the Level Sensors just where you want them.

What’s Included:
(1) RENEW™ Control Module
(2) RENEW™ Standard Metering Reservoirs
(2) Flow Control Valves
(2) Standalone Level Sensors
(4) Level Sensor Shrouds
(4) Suction Cups
(2) Level Sensor Mount Vertical Members
(1) RENEW™ / STORM™ Communication Cable
All necessary Mounting Hardware

Mounting Considerations:

  • Each Reservoir measures approximately (10″ tall) x (8″ wide) x (8″ deep) front-to-back, and must be mounted higher than the aquarium/sump (waste reservoir) and the highest level of the replacement water (replacement reservoir).  Each will weigh approximately 10 pounds when full, so they need to be securely mounted to a strong vertical wall.
  • The Reservoirs rarely need to be accessed once installed, so they can be tucked up into an out of the way location
  • The Control Module measures approximately (4″ tall) x (6″ wide) x (3″ deep) front-to-back, and should be located in a dry location with adequate accessibility.   The Control Module should never be mounted above an open body of water.

Necessary Plumbing and Equipment:

  • Each Metering Reservoir has three barbed plumbing ports:  The inlet and outlet ports accept 1/2″ ID tubing and the loopback port accepts 5/8″ ID tubing.  Tubing is sold separately.
  • Two pumps are needed to move the water to the Metering Reservoirs.  They should be capable of delivering at least 1 gallon per minute to the Reservoirs’ mounting heights.  They will need to connect to 1/2″ ID tubing either directly or through adapters.

Quick Overview

Genesis Reef Systems RENEW™ Advanced Auto Water Change System

Additional Information

SKU GRS-ADV
Manufacturer Genesis Reef