Tunze Controllers

Tunze Multicontroller 7096 Learn More

TUNZE® Multicontroller 7095 is a digital control unit for all Turbelle® pumps with Driver 7240.26 / 7240.27 or electronic motor. The unit simulates the different marine flow conditions in the aquarium. By means of the Pump Adapter 7094.40, Turbelle® classic 2002 and 4002 can also be controlled. Multicontroller 7095 contains an LED moonlight with a 29-day moon phase and can control up to eight Turbelle®. The clearly arranged operating panel with a waterproof membrane keypad and adjusting knobs ensures a precise and practical operation. The output of the controlled pumps is shown by an LED display indicating from 30 to 100 per cent. All pump connections are located on the lower side of the unit.

Learn More

The Tunze Water Level Alarm has three sensors: one run-dry protection sensor and two overflow sensors. Each sensor comes with a holding device which can be stuck with silicone or clamped to horizontal or vertical panes. The holding devices can also be combined. The control unit has an optical indicator for each sensor and an alert sound emitter. The switched socket outlet has a breaking capacity for pumps up to 230 V, 1800 W (at 115 V, 900 W). The water level alarm is used as a supplement to water refill plants. In the event of a failure, the switched socket outlet switches off all consumers connected; in addition a warning signal is sounded and a red LED lights up. Please note: The water level alarm is no remedy for defects in installation or maintenance. It protects Tunze filter plants in the aquarium or in the cabinet against running dry and can prevent damage, which might occur by accidental emptying of the filter tank, for example. But, the water level alarm can also provide protection against overflow for water level regulators lacking refill water. In Tunze cabinet plants, the unit can monitor the outlet and can protect the aquarium against overflow when the drain pipe system is clogged, for example. The water level alarm can monitor refill plants (Osmolator) with large water tanks and can operate as an overflow protection. Learn More

TUNZE® digital measuring instruments have been developed especially for the use in aquarism. The instruments with their electrodes operate at a high accuracy and are comparable with laboratory instruments in quality. The clearly arranged operating panel with key pad and adjustment knobs ensure fast and easy handling. The controller comes with parts for two different types of wall mounting. Learn More

TUNZE® digital measuring instruments have been developed especially for the use in aquarism. The instruments with their electrodes operate at a high accuracy and are comparable with laboratory instruments in quality. The clearly arranged operating panel with key pad and adjustment knobs ensure fast and easy handling. The controller comes with parts for two different types of wall mounting. Learn More

Used for precise determination of the conductivity value in fresh, brackish and salt water. In salt water this conductivity meter displays the salt content through conductivity several times more accurate and simpler than a laboratory aerometer. This unit combines a robust hard carbon electrode and a temperature probe into a single-stick measuring electrode. It is automatically temperature compensated. The measuring unit runs efficiently on a 9 Volt battery provided with an auto power off function. Continuous operation is possible without any problems when connected up to a separate power-supply unit. The measuring instrument comes with two types of wall holding device. The probe has a universal profiled holder and thus solves almost all installation problems. Learn More

This controller set is a measuring and regulating station used to heat or cool with a reading in °Celsius. With the power supply by the switched socket outlet provided the controller operates as a power supply unit. With batteries fitted (not contained in the scope of supply) the instrument can be used as an easy-to-handle and precise temperature measuring instrument. The measuring instrument comes with two different types of wall mount. The electrode comes with a universal holding device and thus solves almost all mounting problems. Learn More

This Tunze controller set is a measuring and regulating station used to heat or cool with a reading in °F. With the power supply by the switched socket outlet provided the controller operates as a power supply unit. The switching output is 900 W at 115V/60Hz. With batteries fitted (not contained in the scope of supply) the instrument can be used as an easy-to-handle and precise temperature measuring instrument. The measuring instrument comes with two different types of wall mount. The electrode comes with a universal holding device and thus solves almost all mounting problems. Learn More

Tunze pH/CO2 controller set Learn More