Neptune Systems Modules and Control Hardware

Easily add float switches, water on the floor sensors, etc. to the AquaController 3 or AquaController 3 Pro. Simply plug the Breakout box's minidin 8 cable into the AquaController I/O port, and then attach the float switch, or water on the float switch wires to the quick connector terminals. No soldering or special tools required.    5' Cable plugs into the I/O Connector of the controller.    

LED dimming has never been easier

Every day it seems there is yet another LED light fixture released. Each one with its own method for control and dimming. With this module, you can outfit your Apex System with the ability to control many different brands of LED lights…from those that use the common 0-10V interface to the more complex like those that use a serial port connection such as the Aqua Illuminations Sol and Acan Lighting fixtures.

Have the Apex take control of your variable speed pumps and do things you never could imagine with a stock pump controller.

If you have pumps like those from Tunze that can be speed controlled via their built-in 0-10V control signal, then this Apex Module was built just for you. Control up to four individual wavemaker style pumps with this module.

When you get complete control over all your EcoTech VorTech wireless pumps – the possibilities are endless!

EcoTech VorTech pumps are one of the most widely used, and loved, pieces of aquarium gear on the market today. As great as they are though, sometimes you just want to get a bit more control over them. With this module, your Apex will become the taskmaster telling your pumps exactly what to do based on time of day, feed mode, power outage mode, and just about any other thing you can can come up with.

Real-time Monitoring of Dissolved Oxygen in Many Aquariums is a Great Safety Net

Many marine aquarists only give the oxygen content in their aquarium water a passing thought, not fully understanding how the level of the Dissolved Oxygen (DO) in their tanks can affect their entire tank population.

Real-time Monitoring of Salinity in Your Aquarium

Maintaining consistent salinity in your aquarium is key to the well being of every organism inside it. And, as busy as we sometimes are, we don’t even realize our parameters are out of whack until it’s too late. With this module, your Apex will be constantly monitoring the Salinity in your tank and will let you know the minute it is trending outside of the safety zone. 

And, there is an added bonus, you get an extra temperature port as well as six I/O switch inputs for use on ATO, feed buttons, leak alarms or whatever else you may come up with. Salinity varies with water temperature. This extra temperature port is extra important because, when used, it is coupled with the conductivity probe’s value to calculate the most accurate real-time salinity measurement possible.

4 in 1 goodness with this module!

The PM1 probe module is just what you need if you want to monitor pH or ORP in your tank. And, there is an added bonus, you get an extra temperature port as well as six I/O switch inputs for use on ATO, feed buttons, leak alarms or whatever else you may come up with.

This module is perfect for someone that wants to add an additional pH or ORP port to their Apex System.

The Energy Bars available for our Apex systems are much more than a glorified power strip. In fact, this component of your aquarium controller equipment is far more important than most people realize – and not all systems are created equal! It is obvious that this component is key to controlling things on your aquarium, but what is not so apparent is how it is critical to preventing catastrophe in your aquarium. 

Designed for a USA-style 120V power grid.
Eight controllable outlets. Six of these outlets are controlled by super-silent solid-state triacs and are rated at 5A. Two of the outlets are controlled by high-current mechanical relays and are rated at 10A.
Each Energy Bar can consume a total of 15A  and has a built-in 15A circuit breaker.
Six AquaBus connectors so you will have five free to connect to more modules or Energy Bars