Purple Wave Spectrum - XB SERIES with Silver Finish
The efficient alternative to supplemental purple T5HO lamps...
This is the Very High Output version of our already powerful Purple Wave fixture. The Purple Wave XB Series delivers 20% more light than our original Purple Wave. The XB Series uses the same amount of electricity and contains the same LED colors that are used in the original series.
This fixture produces a striking supplemental purple light that is designed for use with a full spectrum fixture (such as our 12000K Reef spectrum or the 14000K Reef spectrum). Beyond adding a purple hue to your reef tank, the Purple Wave is designed to accentuate and intensify the naturally occurring reds, oranges and yellows in your corals while causing them to fluoresce for added viewing enjoyment. It also contributes high PAR levels for photosynthesis in a reef aquarium, which increases the growth of your corals. Add this dimmable fixture to your aquarium and soak your corals in rich purple light. Click on the Product Info tab below to review the technical details of this fixture.
Recommended for: Reef keepers who love the look of the purple T5HO reef lights (fiji Purple, ATI Purple Plus).
- Custom selection of LEDs provides a full light spectrum necessary to maintain a successful reef aquarium with beautiful color rendition.
- Contains key wavelengths missing from most reef LED fixtures
- High PAR levels provide the light needed by Zooxanthellae algae which produce the food needed by hard and soft corals for maximum coloration and growth.
- U.S. made, industrial quality, fan-free LED fixture.
- Top quality LEDs protected by heavy spray-proof aluminum case and tough, easy to clean polycarbonate cover.
- Even, edge-to-edge light with no hot spots and no disco effect.
- Dimmable from 100% to 10% when used with our manual dimmer or controller. Compatible with these controllers: Apex, Reef Keeper Lite and Reef Angel.
- High PAR levels with immediate power savings compared to T5’s and Metal Halide.
- 50,000 hour projected life.
- Has the approximate color temperature of a 14000K Metal Halide bulb.
Note: For single fixture tanks, a 90° wide beam angle is recommended for tank mounting or “rim mounting” to ensure even distribution of the light.
- LED Selections per 12" Board: (6) 450nm Royal Blue, (4) 405nm UV, (3) 6500K Cool White, (2) 625nm Red
- We purchase top-bin LEDs from the world's largest and most reputable LED manufacturers (i.e. Philips Lumileds, Everlight, etc.).
- We use 1W and 3W LEDs in our fixtures, and they are driven at 350mA to ensure long life and high electrical efficiency. Due to the large number of LEDs we use in every fixture, we do not need to overdrive the LEDs to achieve extremely high PAR ratings.
Product Features: 0-10V Dimmable Driver (Dimmable from 100% to 10%). Compatible with these controllers: Apex, Reef Keeper Lite and Reef Angel - IP66 Waterproof Rating- CE Safety Certification & ROHS Compliant- Built-to-Order in the USA- 3 Year Warranty- Innovative 'T-Rail' for Unlimited Mounting Options- Return within 30 Days for Full Product Refund- System Includes: LED fixture/power supply/8' cord/plug/mounting bracketsPAR:
PAR (Photosynthetically Active Radiation) defines the type of light that is needed by corals (specifically, coral’s symbiotic algae) for photosynthesis and it is measured in micromoles per square meter per second (μmol/m2/s). PPFD (Photosynthetic Photon Flux Density) is a measurement of the amount of PAR that falls on a given area every second, and it is an extremely important metric for successfully propagating corals in your aquarium. All of our LED fixtures emit extremely high PPFD levels -- far higher than any fixture in our price range.
You need to define a desired light level to calculate the number of fixtures needed on your tank. Use these definitions as a guide:
Ultra High Light is defined as the light level that should only be used by advanced aquarists and researchers seeking to maximize coral coloration through elevated chromoprotein levels. Ultra high light will usually require the use of multiple fixtures, and users should have experience in maintaining a reef aquarium under high PAR levels. Depending on the light levels the corals were previously exposed to, users should slowly acclimate their tank to this light level by using a manual dimmer or a controller.
High Light is defined as the light level you will need to successfully grow hard corals, including SPS. This will likely require the use of multiple fixtures. Depending on the light levels the corals were previously exposed to, users should slowly acclimate their tank to this light level by using a manual dimmer or a controller.
Medium Light is defined as the level that is most often used to successfully keep soft corals and LPS in your aquarium. In the event only one fixture is required and you want to add a supplemental fixture (Pure UV, Purple Wave or Super Actinic Reef), the use of a manual dimmer or controller is recommended to lower the total light level.
Viewing Light is used by those who don’t intend to grow coral but want an illuminated tank where the colors on fish will stand out.
IMPORTANT NOTE: The fixture calculator is designed to give you a recommendation on the number and length of fixtures needed to achieve a specified light requirement in the tank you select. Due to rounding, the calculator may return the same recommendation for multiple light levels. This is not an error.
To achieve the highest light (PAR) levels in a reef aquarium with a single fixture (or single row of fixtures), we recommend the 75 or 90 degree beam angle mounted 2-3” above the water. Select the 75 degree beam angle on tanks measuring up to 12” wide (from front to back) and a 90 degree beam for tank widths over 12”.
When mounting at this height (2-3” above water line) the 60, 45 and 30 degree beam angles should only be used on aquariums with multiple rows of lights or to “target” a particular area. This level of light is usually only required in when you are trying to target specific areas of the aquarium (i.e. clams, island reefs, etc.).
Height Above Water:
- 2-3": 90 degree beam angle
- 6-11": 75 degree beam angle
- 12-23": 60 degree beam angle
- 18-24": 45 degree beam angle >24": 30 degree beam angle
- Additional Information
- Product Specs